It has the characteristics of high toughness, tensile strength, corrosion resistance, low temperature resistance and good wear resistance. It is widely used in chemical, clothing, packaging, food and other fields. Can be filled, flame retardant, modified, the surface can be embossed, frosted. LDPE (High Pressure Low Density Polyethylene) is softer, has lower mechanical strength and lower melting point, and is suitable for making films and cable insulation. HDPE (low pressure high density polyethylene) has higher rigidity, higher mechanical strength and higher melting point. Suitable for hollow products, injection products, etc., widely used in the manufacture of hockey rink wall panels. Thickness: 1-350mm Color: natural color, white, blue, yellow, gray, black, green, etc. [1]
HDPE board, rod
The PE sheets produced are all produced with imported equipment and unique internal stress relief technology, and new PE raw materials are used without adding any recycled materials. After years of unremitting innovation and improvement, bottom cutting has eliminated the problems of sheet deformation, air bubbles and easy breakage.
Thickness (H) x Height (H): 0.2mm – 3mm x1200mm Other specifications can be customized
Thickness (H) x length (L) x width (W): 2mm – 350mm x 6000mm x 2000mm Other specifications can be customized
Dimensions: bar
Diameter (Ф) x Length (L): 15mm – 350mm x 1000mm Other specifications can be customized
Dimensions: Pipe
Diameter (Ф) x length (L): 20mm – 350mm x 1000mm Other specifications can be customized
