Knowledge

Home > Knowledge > Content
Has superior chemical resistance and heat resistance
Apr 28, 2018

The strength of PP increases with the ethylene content. The Vicat softening temperature of PP is 150°C. Due to the high degree of crystallinity, this material has very good surface stiffness and scratch resistance. PP does not have the problem of environmental stress cracking. In general, PP is modified by adding glass fibers, metal additives, or thermoplastic rubber. PP flow rate MFR range is 1~40. PP materials with low MFR have better impact resistance but lower strength. For the same MFR material, the copolymer type has higher strength than the homopolymer type. Due to crystallization, PP shrinkage is quite high, typically 1.8 to 2.5%. And the uniformity of the shrinkage direction is much better than that of materials such as PE-HD. Adding 30% of the glass additive can reduce the shrinkage to 0.7%. Homopolymer and copolymer PP materials have excellent resistance to moisture absorption, acid and alkali corrosion, and resistance to dissolution. However, it is not resistant to aromatic hydrocarbons such as benzene solvents, chlorinated hydrocarbon (carbon tetrachloride) solvents, and the like. PP is not as resistant to oxidation as PE at high temperatures.







Copyright © Wenzhou Xintai New Materials Stock Co.,Ltd All Rights Reserved.Tel: 0086 577 26898244